Filter
Top Products
Maintenance_ 2
4. Pull the waste toner container out of the machine using the handle.
5. Pull the imaging unit out of the machine using the groove on the front of
the imaging unit.
Do not touch the green surface of the drum located in the imaging
unit. Use the handle on the cartridge to avoid touching this area.
6. With a dry and lint-free cloth, wipe away any dust and spilled toner from
the toner cartridges area and their cavities.
•If toner gets on your clothing, wipe it off with a dry cloth and wash
it in cold water. Hot water sets toner into fabric.
•If your machi
ne or its surrounding is contaminated with toner, we
recommend you use a cloth or tissue dampened with water to
clean. If you use a vacuum cleaner, toner blows into the air
then might be harmful if inhaled.
After cleaning, let the machine to dry completely.
7. H
olding the groove on the front of the imaging unit, push imaging unit
into the machine.
Do not touch the green surface of the drum located in the imaging
unit. Use the handle on the cartridge to avoid touching this area.
8. Insert the waste toner container into position and then push it to make
sure that it is firmly seated in place.
9. Slide four toner cartridges back into the machine.
10. Reinstall all the compartments into the machine and close the front door.
If the front door is not completely closed, the machine will not
operate.
11. Plug in the power cord and turn the machine on.