Filter
Top Products
Network setup (CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185FW only)_ 2
You can use network after connecting network cable to a corresponding
port on your machine.
Printing a network configuration report
You can print Network Configuration Report from the machine’s control
panel that will show the current machine’s network settings. This will help
you to set up a network and troubleshoot problems.
1. Pr
ess Menu on the control panel.
2. Pre
ss the left/right arrow until Network appears and press OK.
3. Pre
ss the left/right arrow until Network Info. appears and press OK.
4. Pre
ss the left/right arrow until Yes appears and press OK.
Using this Ne
twork Configuration Report, you can find your machine MAC
address and IP address.
For example:
• MAC
Address:00:15:99:41:A2:78
• I
P Address:192.0.0.192
Setting IP address
First, you have to set up an IP address for network printing and
managements. In most cases a new IP address will be automatically
assigned by a DHCP (Dynamic Host Configuration Protocol) server located
on the network.
In a few situations the IP address must be set manually. This is called a
static IP and
is often required in corporate Intranets for security reasons.
• DHCP IP a
ssignment: Connect your machine to the network, and wait a
few minutes for the DHCP server to assign an IP address to the
machine. Then, print the Network Configuration Report as explained
above. If the report shows that the IP address has changed, the
assignment was successful. You will see the new IP address in the
report.
• Sta
tic IP assignment: Use SetIP program to change the IP address
from your computer. If your machine has a control panel, you can also
change IP address using the machine's control panel.
In an office environment, we recommend that you contact a network
a
dministrator to set IP address for you.
IPv4 setting using control panel (Windows)
1.Connect your machine to the network with a network cable.
2.T
urn on the machine.
3.Pr
ess Menu on the control panel.
4.Pre
ss the left/right arrow until Network appears and press OK.
5.Pre
ss the left/right arrow until TCP/IP appears and press OK.
6.Pre
ss the left/right arrow until Static appears and press OK.
7.Pre
ss the left/right arrow until IP Address appears and press OK.
8.Ente
r the IP address using numeric keypad and press OK.
Enter a byte between 0 and 255 using the number keypad and
press the left/right arrow to move between bytes.
Repeat this to complete the address from the 1st byte to the
4th byte.
9.Enter other parameters such as the Su
bnet Mask and Gateway
appears and press OK.
10.After enterin
g all parameters, press Stop/Clear to return to ready
mode.
Now go to "Installing wired network-connected machine’s driver" on
page 3.
IPv4 setting using SetIP Program (Windows)
This program is for manually setting the network IP address of your
machine using its MAC address to communicate with the machine. A
MAC address is the hardware serial number of the network interface and
can be found in the Network Configuration Report.
Before using SetIP program, disable the computer firewall by performing
the
following steps.
1.Open
Control Panel.
2.D
ouble-click Security Center.
3.Click W
indows Firewall.
4.Di
sable the firewall.
Installing the program
1.Insert the Printer Software CD-ROM provided with your machine.
When the driver CD runs automatically, close that window.
2.Start
Windows Explorer and open the X drive (X represents your
CD-ROM drive).
3.D
ouble-click Application > SetIP.
4.D
ouble-click Setup.exe to install this program.
5.Se
lect a language, then click Next.
6.F
ollow the instructions in the window and complete the installation.
Starting the program
1.Connect your machine to the network with a network cable.
2.T
urn on the machine.
3.F
rom the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
4.Click on
the icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5.En
ter the machine’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this
information assigned by a network manager before proceeding.
•MAC Address: Find the machine’s MAC address from the Network
Configuration Report and enter it without the colons. For
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•IP Ad
dress: Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150,