Filter
Top Products
Media and tray_ 6
adhesive backing is designed for only a single pass through the
machine.
• Do not use labels that are separating from the backing sheet or are
wrinkled, bubbled or otherwise damaged.
CardStock/Custom-sized paper
Postcards, cards and other custom-sized materials can be printed with your
machine.
• Do not print on media smaller than 76 mm (3 inches) wide or 152.4 mm
(6 inches) long.
• In
software applications, set the margins at least 6.4 mm (0.25 inches)
away from the edges of the material.
Letterhead/Preprinted paper
Letterhead/Preprinted materials can be printed with your machine.
• Letterhead/ Preprinted paper must be printed with heat-resistant ink that
will not melt, vaporize or release hazardous emissions when subjected
to the machine’s fusing temperature for 0.1 second. Check your
machine’s specification to view the fusing temperature about 170°C (338
°F).
• Letterhea
d/ Preprinted paper ink must be non-flammable and should not
adversely affect machine rollers.
• Forms and
letterhead should be sealed in a moisture-proof wrapping to
prevent changes during storage.
• Before you loa
d letterhead/preprinted paper, verify that the ink on the
paper is dry. During the fusing process, wet ink can come off preprinted
paper, reducing print quality.
Glossy photo
Load one paper to the tray at a time, facing glossy side up.
• Ma
ke sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
Matte photo
Load one paper in the tray at a time, side to be printed facing up.
Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the
control panel. These settings will apply to copy and scan modes. For
computer printing, select the paper size and type in the application program
you use on your computer (See "Opening printing preferences" on page 2).
The settings made from the machine driver override the settings on
the control panel.
Setting the paper size
1. Press Menu on the control panel.
2. Pres
s the left/right arrow until System Setup appears and press OK.
3. Pres
s the left/right arrow until Paper Setup appears and press OK.
4. Pres
s the left/right arrow until Paper Size appears and press OK.
5. Pre
ss the left/right arrow to select the paper size you want.
6. Pres
s OK to save the selection.
7. Pres
s Stop/Clear to return to ready mode.
If you want to use special-sized paper-such as a billing paper, select
Edit... in the Paper tab in the Printing Preferences (See "Opening
printing preferences" on page 2).
Setting the paper type
1. Press Menu on the control panel.
2. Pres
s the left/right arrow until System Setup appears and press OK.
3. Pres
s the left/right arrow until Paper Setup appears and press OK.
4. Pres
s the left/right arrow until Paper Type appears and press OK.
5. Pre
ss the left/right arrow to select the paper type you want.
6. Pres
s OK to save the selection.
7. Pres
s Stop/Clear to return to ready mode.
Using the output support
The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
Illustrations on this user’s guide may differ from your machine
depending on its options or models. Check your model name.
AAAAA