Filter
Top Products
Wireless network setup (CLX-3185FW/CLX-3185WK only)_ 9
5.Enter the machine’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this
information assigned by a network manager before proceeding.
•MAC Address: Find the machine’s MAC address from the Network
Configuration Report and enter it without the colons. For
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•IP Ad
dress: Enter a new IP address for your printer.
For example, if your computer’s IP add
ress is 192.168.1.150,
enter 192.168.1.X. (X is number between 1 and 254 other than
the computer’s address.)
•Su
bnet Mask: Enter a Subnet Mask.
•Default Gateway: Ent
er a Default Gateway.
6.Click Apply, an
d then click OK. The machine will automatically print
the Network Configuration Report. Confirm that all the settings are
correct.
7.Click Exit to close the SetIP prog
ram.
8.If necessary,
restart the computer’s firewall.
IP setting using SetIP Program (Macintosh)
For using SetIP program, disable the computer firewall before continuing
by performing the following:
The path and UIs may differ by Macintosh OS version. Refer to the
Macintosh OS manual.
1.Open System Preferences.
2.Click Secu
rity.
3.Click th
e Firewall menu.
4.Turn
firewall off.
The following instructions may vary for your model.
1.Conn
ect your machine to the network with a network cable.
2.In
sert the Installation CD-ROM, and open the disk window, select
MAC_Installer > MAC_Printer > SetIP > SetIPApplet.html.
3.Doub
le-click the file and Safari will automatically open, then select
Trust. The browser will open the SetIPApplet.html page that shows
the printer’s name and IP address information.
4.Click on the icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5.Ente
r the machine’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this
information assigned by a network manager before proceeding.
•MAC Addres
s: Find the machine’s MAC address from the Network
Configuration Report and enter it without the colons. For
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•IP Ad
dress: Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150,
enter 192
.168.1.X. (X is number between 1 and 254 other than
the computer’s address.)
•Subnet Mask:
Enter a Subnet Mask.
•Def
ault Gateway: Enter a Default Gateway.
6.Select Apply, th
en OK, and OK again. The printer will automatically
print the configuration report. Confirm that all the settings are correct.
Quit Safari. You may close and eject the installation CD-ROM. If
necessary, restart the computer’s firewall. You have successfully
changed the IP address, subnet mask, and gateway.
Configuring the machine’s wireless network
Before starting, you will need to know the network name(SSID) of your
wireless network and the network key if it is encrypted. This information was
set when the wireless router(access point) was installed. If you do not know
about your wireless environment, please ask the person who has set up
your network.
To configure wireless parameters, you can use Sy
ncThru™ Web Service.
Using SyncThru™ Web Service
Before starting the wireless parameter configuration, make sure cable
connection status.
1.C
heck whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
2.Start
a web browser such as Internet Explorer, Safari or Firefox and
enter your machine’s new IP address in the browser window.
For example:
3.Click Go to access the SyncThru™ Web Service.
4.Click Log
in on the upper left of the website.
A Lo
gin page appears.
5.T
ype in the ID and Password then click Login.
If it’s your first time logging into SyncT
hru™ Web Service, type in the
below default ID and password.
•ID: admin
•Password: sec00000
6.W
hen the SyncThru™ Web Service window opens, click Settings >
Network Settings.
7.Click W
ireless > Wizard.
Wizard will help you setup the wireless network configuration.
However, if you want to set the wireless network directly, select
Custom.
8.Se
lect the one Network Name(SSID) in the list.
•SSID: SSID (Service Set Identifier) is a name that identifies a
wireless network. Access points and wireless devices attempting
to connect to a specific wireless network must use the same
SSID. The SSID is case-sensitive.
•Oper
ation Mode: Operation Mode refers to the type of wireless
connections (See "Wireless network name and Network Key" on
page 1).
-Ad-hoc:
Allows wireless devices to communicate directly with
each other in a peer-to-peer environment.
-Infrastructure: Allo
ws wireless devices to communicate with
each other through an access point.