Filter
Top Products
Introduction_ 8
Understanding the Status LED
The color of the Status LED indicates the machine's current status.
Samsung does not recommend using a non-genuine Samsung toner
cartridge such as one that is refilled or remanufactured. Samsung
cannot guarantee a non-genuine Samsung toner cartridge's quality.
Service or repair required as a result of using non-genuine Samsung
toner cartridges will not be covered under the machine warranty.
Check the message on the display. Follow the instructions in the
message or refer to troubleshooting part (See "Understanding display
messages" on page 5). If the problem persists, call a service
representative.
All printing errors will be appeared in the Smart Panel program
window. If the problem persists, call a service representative.
Introducing the useful buttons
•Supported optional devices and features may differ according to your
model. Check your model name.
•Ill
ustrations may differ from your machine depending on the model or
its options. Check your model name.
Menu button
When you want to know the machine status and set your machine to use an
advanced feature, click the Menu button (See "Machine status and
advanced feature" on page 1).
Power button
For CLX-3185 CLX-3185N and CLX-3185WK, plug the power cord into the
AC power outlet and press this button, the machine will be turned on. When
you want to turn the power off, press this button until Power Down appears
on the display. Choose Yes to turn the power off.
For CLX-3185FN and CLX-3185FW, plug the power cord into the AC power
ou
tlet and then the machine will be turned on automatically.
When the machine goes into power save mode, Power button lights
on blue.
Print screen button (CLX-3185 only)
• In case of print the active windows displayed in the monitor.
1.Press Print Screen on the control panel.
2.Press OK wh
en Active appears.
The machine prints the active windows displayed in the monitor
• In case of print th
e whole monitor screen.
1.Press Print Screen on
the control panel.
2.Press OK wh
en Full appears.
The machine prints the whole monitor screen.
•The page will be printed on the default page like A4 or Letter.
•You can onl
y use this function with a USB-connected machine.
•Print Screen can onl
y be used with Windows and Macintosh
operating systems.
•You can onl
y use this function if the machine driver is installed.
Eco Copy button (CLX-3185/CLX-3185N/CLX-3185FN
only)
The Eco Copy function cuts toner consumption and paper usage. You can
configure Eco Copy function to adjust your paper savings and save setting
you want to use.
1. Pres
s Menu on the control panel.
2. Pres
s the left/right arrow until Copy Setup appears and press OK.
Status Description
Off • The machine is off-line.
• The
machine is in power saver mode. When
data is received or any button is pressed, it
switches to on-line automatically.
• Wirel
ess function can not be used.
Green Blinking • When the green LED slowly blinks, the
machine is receiving data from a computer.
• Whe
n the green LED blinks rapidly, the
machine is printing data.
On Th
e machine is on-line and can be used.
Blue On When the machine is connected to a wireless
network, Wireless LED lights on blue
(CLX-3185FW/CLX-3185WK only).
Red Blinking • A minor error has occurred and the machine is
waiting for the error to be cleared. Check the
display message. When the problem is
cleared, the machine resumes (See
"Understanding display messages" on
page 5).
• A
small amount of toner is left in the cartridge.
The estimated cartridge life of toner is close.
Prepare a new cartridge for replacement. You
may temporarily increase the printing quality
by redistributing the toner (See "Redistributing
toner" on page 1).
On • A tone
r cartridge has almost reached the end
of its estimated cartridge life. It is
recommended to replace the toner cartridge
(See "Replacing the toner cartridge" on
page 2).
• A
paper jam has occurred (See "Clearing
paper jams" on page 2).
• The
door is opened. Close the door.
• The
re is no paper in the tray. Load paper in
the tray.
• The machine has stopped due to a major
error. Check the display message (See
"Understanding display messages" on
page 5).