Filter
Top Products
12.15 <
Machine status and advanced
Printing a report
You can print a report on the machine's configuration or font list, etcetera.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, then enter
password and press OK.
3 Press the Print/Report tab.
Option Description
Print You can print Network
Configuration, PS3 Font List, PCL
Font List and Schedule Jobs
Report. Schedule Jobs Report
shows the job list in pending, in
waiting, in delayed faxing or the
Mailbox list as well.
Accounting
Reports
Supplies
Information
You can print the amount of each
category that your machine has
printed so far.
Network Auth.
Log Report
It displays user login IDs and emails.
Usage Page
Report
You can print the report on the
amount of printouts depending on the
paper size and type.
Accounting
Reports
Prints the report of printing out count
for each login user. This is used only
when network authentication in
enabled with SyncThru™ Web
Service. (Page
13.9)
Standard Acct.
Usage Report
Prints the used amount of Standard
Accounting
Standard Acct.
Remain
Report
Prints the remained amount of
Standard Accounting
Report Configuration
Report
You can print a report on the
machine's overall configuration.
Fax Report You can set to print the information of
a fax reports.
• Multi Send Report: When you fax
to several destination, set this
option to print a transmission report.
On is to print every time you send a
fax, the machine prints a
confirmation report. With On-Error,
only when the transmission error
occurred, the report will be printed
out.
• Fax Send Report Appearance:
You can select whether the image
on the confirmation report shows or
not.
• Fax Sent/Received Report: The
machine stores the logs on each
transmission and prints out every
50 logs with this option On. It you
select Off, the machine stores the
logs but does not print.
• Fax Send Report: The machine
prints the confirmation report after
each fax job, only when you send a
fax to one destination.
Report
(Continue)
E-mail
Confirmation
Report
The report shows the job of scanning
and sending it via Scan to Email.
• On: The report is printed whether a
job successfully completed or
failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints the
report.
Scan to Server
Confirmation
The report shows the job of scanning
and sending it via SMB and FTP.
• On: The report is printed whether a
job successfully completed or
failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints the
report.
Clean Fuser You can clean the inside of a fuser
roller by printing a cleaning paper.
You can select among On, Off, Print
Now. Default setting is On.
Option Description