Filter
Top Products
4.7 <
Loading originals and print media>
Loading paper
Loading paper in tray 1, optional tray or optional
high capacity feeder
Load the print media you use for the majority of your print jobs in the
tray 1. The tray 1 can hold a maximum of 520 sheets of 80 g/m
2
(20 lb
bond) plain paper.
You can purchase an optional tray and attach it below the standard tray
to load an additional 520 sheets of paper. (Page 15.1)
1 To load paper, pull and open the paper tray and place paper with the
side you want to print facing up.
Note
• When using a transparency, avoid using transparency without
stripe band or with stripe band on the longer side of the paper.
It might cause a paper feeding jam.
• Place the side to be printed facing up.
2 After inserting paper into the tray, while pinching the paper width
guide as shown, move it toward the stack of paper until it lightly
touches the side of the stack. Do not press the guide too tightly to
the edge of the paper; the guide may bend the paper.
Note
• Do not push the paper width guides far enough to cause the materials
to warp.
• If you do not adjust the paper width guides, it may cause paper jams.
Envelope
Preprinted paper
Transparency
Punched paper
Card stock
Letterhead paper
Label