Filter
Top Products
CD Settings tab
The CD Settings tab allows you to specify settings for burning and extracting audio from CDs.
Item Description
Use strict Red Book specification for Select this check box if you want to be notified prior to burning a disc-at-once CD if anything about
DAO validation your CD project is against strict Red Book standards.
These warnings are not critical, and in most cases you will not write an unreadable disc if you proceed.
Clearing this check box will not suppress critical warnings that will result in an unreadable disc.
Use SPTI Direct for CD burning Select this check box if you want to use SPTI (SCSI Pass-Through Interface) to communicate with your
CD burning drive.
Overwrite CD Text autodetection If the software incorrectly detects that your CD recorder is not able to write CD Text, select this check
results box to turn on CD Text writing for your drive.
Note:
Check the documentation provided with your CD recorder to determine whether the drive is
able to write CD Text.
Include Wide SCSI devices when Select this check box if you want to scan for wide SCSI CD drives when you attempt to extract data from
searching for drives or burn CDs.
When the check box is cleared, the application will not scan for wide SCSI devices, which can increase
compatibility with some USB device drivers that incorrectly identify themselves as wide SCSI.
Skip drive database; autodetect When the check box is cleared, an internal configuration file is used to determine your drive’s
drive capabilities on startup capabilities.
If you encounter problems burning CDs, select this check box, and your drive to determine its
capabilities when the application starts.
Automatically detect CD length Select this check box if you want to automatically detect the length of your blank CDs when you insert
them in your drive.
When this check box is cleared, the Default CD length (minutes) setting is used, and you can click the
CD Time Remaining box in the status bar to update the available time on a CD.
Default time between CD tracks Type a value in the edit box to specify the length of time that is inserted between disc-at-once CD
(seconds) tracks.
Default CD length (minutes) Type the default length for CD media. This length is used if the software has not yet scanned your CD
drive or if no CD is in your drive.
This length is used to calculate the amount of time remaining on the disc that is displayed in the status
bar.
CUSTOMIZING SOUND FORGE PRO SOFTWARE |
321