A SERVICE OF

logo

Removing volume, pan, bus, or assignable effect envelopes
1.
Select the track(s) from which you want to remove the envelope(s).
2.
From the Insert menu, choose Envelopes. A submenu appears showing a check mark next to the envelopes being used.
3.
From the submenu, choose the type of envelope you want to remove. The envelope type is removed from the selected track(s).
Tip:
Press Shift+V to remove a volume envelope or press Shift+P to remove a pan envelope.
Deleting MIDI controller envelopes
Click the down arrow next to the Insert/Hide Envelope button next to the controller's slider in the track header and choose
Delete Envelope.
If you want to show or hide an envelope without deleting its settings, click the Insert/Hide Envelope button
You can also remove continuous controller envelopes on the Output Settings tab in the Track Properties dialog.
Removing effect automation envelopes
1.
Click the arrow adjacent to the Track FX button ( ) and choose FX Automation from the menu. The FX Automation Chooser
appears.
2.
Click the plug-in whose automation envelopes you want to remove. The parameters for the effect appear in the dialog.
3.
Clear the check boxes for the envelopes to be removed.
4.
Click OK.
.
Tip:
You can bypass effect automation without removing envelopes. For more information, see Bypassing effect automation on page
110.
Automating 5.1 surround projects
In a 5.1 surround project, you can automate the center channel’s volume and surround panning using keyframes. For more information,
see Automating panning on page 242.
146 | CHAPTER 9