Filter
Top Products
8-6 Sun Ultra 60 Service Manual • August 2001
FIGURE 8-3 Removing and Replacing the PCI Fan Assembly
8.2.2 Replacing the PCI Fan Assembly
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Position the PCI fan over the speaker assembly (
FIGURE 8-3).
2. Connect the PCI fan as follows:
Locking snap
PCI fan assembly
Chassis slots
Speaker assembly
(reference)
Power harness
Stud
Stud