8-30 Sun Ultra 60 Service Manual • August 2001
FIGURE 8-19 Removing and Replacing the Front Panel
12. Remove the DC switch assembly from the front panel (FIGURE 8-20):
a. Accessing the rear of the front panel and using a small flat-blade screwdriver,
press the detent tab on one side of the DC switch assembly while pushing the
switch toward the front of the front panel.
b. Repeat Step a for the other side of the DC switch assembly.
c. Continue pressing the detent tab on alternate sides and pushing the DC switch
assembly toward the front until the DC switch assembly can be removed from
the housing.
d. Remove the DC switch assembly from the front panel.
Light pipe
Nameplate
Screw (4)
Bezel
Front panel