10-8 Sun Ultra 60 Service Manual • August 2001
4. Attach the wrist strap.
See Section 7.2, “Attaching the Wrist Strap” on page 7-3.
5. Remove the PCI card as follows (
FIGURE 10-3):
a. Using a Phillips-head screwdriver, remove the screw securing the PCI card
bracket tab to the system unit chassis (not illustrated).
Caution – Avoid damaging the connector by not applying force to one end or one
side of the board.
b. At the two upper corners of the PCI card, pull the card straight up from the slot.
c. Remove the PCI card.
6. Place the PCI card on an antistatic mat.
FIGURE 10-3 Removing and Replacing a PCI Card
PCI card