Filter
Top Products
4-20 Sun Ultra 60 Service Manual • August 2001
Note – The serial port A diagnostic will stall if the TIP line is installed on serial
port A.
CODE EXAMPLE 4-17 identifies the serial port A output message when the TIP
line is installed on serial port A.
SUBTEST=’internal_loopback’
BAUDRATE=’230400’
SUBTEST=’internal_loopback’
BAUDRATE=’307200’
SUBTEST=’internal_loopback’
BAUDRATE=’460800’
SUBTEST=’internal_loopback’
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===>
CODE EXAMPLE 4-17 Serial Port A Output Message With TIP Line Installed
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===> 7
TEST=’uarta_test’
‘UART A in use as console - Test not run.’
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===>
CODE EXAMPLE 4-16 Serial Port A Output Message (Continued)