Filter
Top Products
Chapter 9 Storage Devices 9-5
3. Attach the wrist strap.
See Section 7.2, “Attaching the Wrist Strap” on page 7-3.
4. Remove the RMA as follows (
FIGURE 9-2):
a. Remove the front bezel.
b. Using a number 2 Phillips-head screwdriver, loosen the captive screws securing
the RMA to the chassis.
c. Partially remove the RMA from the chassis.
d. Disconnect the peripheral cables and the power cables from the drives
(not illustrated).
e. Remove the RMA from the chassis.
5. Place the RMA on an antistatic mat.