Filter
Top Products
Chapter 10 Motherboard and Component Replacement 10-17
5. Remove the audio card as follows (FIGURE 10-6):
a. Using a Phillips-head screwdriver, remove the screw securing the audio card
bracket tab to the system unit chassis.
Caution – Avoid damaging the connector by not applying force to one end or one
side of the board.
b. Remove the UPA graphics card(s).
See Section 10.4.1, “Removing the UPA Graphics Card” on page 10-10.
c. At the two upper corners of the audio card, pull the card straight up from the
slot.
d. Remove the audio card.
6. Place the audio card on an antistatic mat.