Filter
Top Products
Chapter 4 Troubleshooting Procedures 4-23
4.7.12 SCSI
The SCSI diagnostic validates both the SCSI chip and the SCSI bus subsystem.
CODE EXAMPLE 4-21 identifies the SCSI output message.
4.7.13 All Above
The all above diagnostic validates the system unit.
CODE EXAMPLE 4-22 identifies the all above output message.
Note – The all above diagnostic will stall if the tip line is installed on serial port A
or serial port B.
CODE EXAMPLE 4-21 SCSI Output Message
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===> 11
TEST=’selftest’
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===>
CODE EXAMPLE 4-22 All Above Output Message
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===> 12
TEST=’all_pci/cheerio_test’
SUBTEST=’vendor_id_test’
SUBTEST=’device_id_test’
SUBTEST=’mixmode_read’
SUBTEST=’e2_class_test’
SUBTEST=’status_reg_walk1’
SUBTEST=’line_size_walk1’
SUBTEST=’latency_walk1’
SUBTEST=’line_walk1’
SUBTEST=’pin_test’
TEST=’all_dma/ebus_test’
SUBTEST=’dma_reg_test’
SUBTEST=’dma_func_test’
TEST=’ethernet_test’
SUBTEST=’my_channel_reset’