Filter
Top Products
Printing Basics
4
User Manual 4-31
Using the Windows NT 3.51 PostScript driver
If you are using Microsoft Windows NT, follow the instructions in
ÒInstalling printer software for Windows NT 3.51Ó on page 3-10 to install a
Windows NT PostScript driver with a Phaser 360 printer. You can select
printer page sizes in the driver for Windows NT applications, however,
TekColor color corrections and other PostScript Level 2 features are not
supported by the Windows NT driver. Refer to page 4-3 for instructions on
selecting color corrections from the printerÕs front panel or from
downloadable utility Þles. Refer to your Microsoft Windows NT
documentation for details on features in the Windows NT driver.
Using the Windows NT 4.0 PostScript driver
Setting up installed options
Note
If you are not sure which printer options you have installed, the
printer’s Startup Page lists some of this information, such as
SCSI hard disks. You can print a copy of the Startup Page from
the printer’s front panel.
1.
From the taskbar, click Start, then Settings and Printers.
2.
In the Printers dialog box, click the right mouse button on the
Phaser 360 printer, and select Properties in the menu.
3.
From the Properties dialog box, click the Device Settings tab.
4.
In the Device Setting sheet, scroll to the end of the list to
Installable Options.
5.
Under Installable Options, highlight Optional Lower Tray.
6.
In the box that appears at the bottom of the window, click
Installed.
7.
Select other options you have installed, such as Optional Hard
Drive.
8.
Click OK to return to the Control Panel.