Filter
Top Products
About Your Printer
1
User Manual 1-7
Printer parts and components
Consumables
ColorStix solid-ink sticks
Phaser 360 printer ColorStix
¨
solid-ink sticks come in four colors: cyan,
magenta, yellow, and black. Each of these ink sticks has a unique shape that
matches the shape of the corresponding loading bin on top of the printer.
The printer holds up to three ink sticks of each color, and you can replace ink
sticks easily Ñ and without having to wait until the printer runs out of ink.
ColorStix ink sticks are clean, safe, and environmentally friendly.
Your printer is shipped with a starter ink pack containing one of each color
ink stick. Replace ink sticks when prompted by the printer.
Note
To ensure that your printer is always available for use, Tektronix
recommends that you immediately order and maintain a stock of
each color ink stick. See “Printer supplies” on page 10-2 for
ordering information.
Maintenance tray and waste liner
The maintenance tray is a replaceable tray that is used during the printerÕs
printing and cleaning operations. The blue plastic tray inserted in the
maintenance tray is the waste liner, which catches ink purged when the
printer runs through its cleaning cycle. Replace the maintenance tray when
a message at the printerÕs front panel indicates the tray is low, after about
12,500 prints. Empty the waste liner when prompted by the printer.
Note
To avoid printing delays, always keep an extra maintenance tray
available. See “Printer supplies” on page 10-2 for ordering
information.