Filter
Top Products
Installing Printer Software
3
User Manual 3-5
6.
The Finish Installation dialog box contains instructions for
completing the printer software setup; click Next. The Add
Printer Wizard program is automatically launched.
7.
In the Add Printer Wizard, click Next in the opening dialog box.
8.
Select your printerÕs connection, either Local Printer or
Network Printer, and click Next.
9.
In the Manufacturers/Printers dialog box, click Have Disk.
10.
Type in the drive for the CD-ROM or diskette, and click OK.
11.
Select your Tektronix Phaser 360 printer, and click Next.
12.
Select the port your printer is connected to, and click Next.
13.
Enter a name for the printer, and select the Phaser 360 as the
default printer if desired, and click Next.
14.
Decide if you want to print a test page, select Yes or No, and click
Finish.
15.
In the Installation Completed dialog box, click Finish.
16.
You may see a Restart Windows dialog box if the system needs to
be updated. Decide if you want to restart now or later, and
click OK.
Note
See the “Adobe PostScript Printer Driver User Guide” on the
printer’s CD-ROM (USERGUIDE.PDF) for detailed
information on the AdobePS 4 driver.