Filter
Top Products
5
Printing: Beyond the Basics
5-10 Phaser 360 Color Printer
Previewing with Check Print
With the Check Print option, the printer automatically stops after it prints
the Þrst page of a document, letting you check the document before printing
resumes. This function is especially useful when printing a large job.
Check Print is enabled as a default, with a timeout of 5 minutes: the printer
waits 5 minutes after printing the Þrst page of a document before it
continues printing. You conÞrm your choice to continue or cancel the print
job at the printerÕs front panel. To use the Check Print feature:
1.
Select Check Print in a supported driver:
■ Windows 95 PostScript driver:
In the Device Options tab options, in the Printer features Þeld,
select Check Print.
■ AdobePS 3 driver for Windows 3.1:
In the Features tab options, select Check Print.
■ LaserWriter 8.x driver:
In the Print dialog box, click Options. In the Options dialog box, in
the Check Print drop-down menu, select True.
■ Phaser 360 driver:
In the Print dialog box, click TekColor. In the TekColor Options
dialog box, select Check Print.
■ Phaser 360 GX driver:
In the Print dialog box, in the TekColor printing extension, select
Check Print. (Or, from the Printing menu, in the Printer Driver
Defaults, select Check Print.)
2.
Go to the printer. Check your Þrst print. At the Check Print
message on the printerÕs front panel, press one of the buttons:
■ Reprint: Reprints the Þrst page, then the printer pauses again for
the duration of the selected timeout or until you cancel or continue
the print job.
■ Cancel: Cancels the print job.
■ Continue: Continues printing the entire print job.