Filter
Top Products
8
Troubleshooting
8-14
Phaser 360 Color Printer
6.
If one or more of the color bars are still missing or are light, repeat
the cleaning sequence by pressing the Clean button again. When
cleaning ends, the printer outputs a Cleaning Page that you may
discard as normal ofÞce waste.
7.
If the second cleaning sequence does not cure the light stripes or
missing colors problem, press the Clean button to repeat the
cleaning sequence.
Note
The third cleaning sequence implements a more extensive
cleaning of the printer, which may take longer for the printer to
execute than the previous two cleanings.
8.
If your prints still have color stripe problems after the third
cleaning sequence, turn the printer off for at least 8 hours to allow
the ink to solidify. When the printer is turned back on, it will
perform a self-cleaning routine that should resolve the problem.
9.
If your prints still have color stripe problems, service may be
required.
10.
Return the printer to normal operation by pressing the Exit
button until the Ready message appears.