Filter
Top Products
Printing: Beyond the Basics
5
User Manual 5-5
None: Turning off all color corrections
If you do not want to use any TekColor color corrections, change the color
correction setting to None. Select None when you are doing the following:
■ Using applications that do their own color adjusting.
■ Using ColorSync on a Macintosh or host color correction in
Windows 95.
■ Printing PANTONE Colors using applications for which you have
installed a Phaser 360 PANTONE Color palette.
Monochrome: Printing in gray scale
The Monochrome option prints your color image as a monochrome gray
scale (shades of gray between black and white). Use this option to print
page masters for photocopying in black-and-white.
Use Printer Setting: Using the printer’s current default
The Use Printer Setting option is available only in the supported drivers.
This option sends no color correction information to the printer. It uses the
current default in the printer to process colors for printing. The factory
default color correction is Automatic. The printerÕs default can be one of
the following:
■ Any option selected in the TekColor Correction menu on the
printerÕs front panel.
■ One of the color correction utility Þles sent to the printer.