Filter
Top Products
Installing Printer Software
3
User Manual 3-17
Using the Mac OS installer
1.
Insert either the printerÕs CD-ROM or the Phaser 360 Installer for
Mac OS Disk 1 into the appropriate drive on your computer.
2.
Double-click the Phaser 360 Installer icon. Click Continue until
the Easy Install window appears.
3.
Select Easy Install or Custom Install:
4.
Continue with driver setup instructions depending on the driver
you are using:
■ If you want to use the LaserWriter 7.1.2-based driver, see ÒSetting
up the Phaser 360 printer driverÓ on page 3-18.
■ For most applications, see ÒSetting up the Apple LaserWriter 8.3.4
driverÓ on page 3-19.
■ If you are using QuickDraw GX, see ÒSetting up the Phaser 360 GX
driverÓ on page 3-21.
Easy Install Custom Install
a. Click Install to install the items listed in
the Easy Install window.
b. For details on each item, click Read Me.
a. Select Custom Install from the
pull-down menu.
b. Select individual items to install.
c. Click the I buttons for information on
each item.
d. Click Install to install the selected
items.