Filter
Top Products
7
Caring For Your Printer
7-28
Phaser 360 Color Printer
Cleaning for ink smears: paper-exit path
Approximate time to complete: 10 minutes
If you have already performed the other ÒCleaning for ink smearsÓ
procedures described earlier in this chapter but problems persist, you should
manually clean the paper-exit path. Refer also to ÒCleaning for jams and ink
smears: paper-feed rollersÓ on page 7-22.
Occasionally, stray ink particles and drum ßuid become attached to the exit
Þngers, rollers, and guides under the exit cover causing ink streaks or marks
on the top edge, front, or back of prints. When this occurs, you must clean
these parts using both dry and alcohol-soaked swabs. Refer to ÒUsing
isopropyl alcoholÓ on page 7-19 for more information.
Sample ink smear: paper-exit path
9922-31