Filter
Top Products
Installing Printer Software
3
User Manual 3-19
Setting up the Apple LaserWriter 8.3.4 driver
The LaserWriter 8.3.4 driver uses printer-speciÞc PPDs (PostScript Printer
Description Þles) to learn a printerÕs page sizes, printing options, and media
type options. To use the LaserWriter 8.3.4 driver with a Phaser 360 printer,
do the following steps. If the printer is busy, it may take some time to
complete this conÞguration procedure; you may want to do this procedure
when the printer is idle. You have to conÞgure a printer only once.
Note
During installation, the LaserWriter 8.3.4 driver leaves other
versions of the LaserWriter driver (such as 7.x and 6.x) intact,
but overwrites an earlier version of the LaserWriter 8 driver, if
one exists.
1.
Install the printerÕs software as described on page 3-17. Select
Easy Install to automatically install all of the necessary software,
or select LaserWriter 8.3.4 Driver and Printer Descriptions in the
Custom Install window.
2.
From the Apple menu, open the Chooser.
3.
Select the LaserWriter 8 driver icon.
4.
Click on the Zone your printer is in. See your network
administrator if you have questions.
5.
Select your printer from the list, then click the Setup button. An
auto-setup program searches for the printerÕs PostScript Printer
Description Þle (PPD).
You may see a dialog box showing the PPD Þle you installed in
Step 1. Click TKP360P1.PPD and click Select.
Or, if you donÕt see this Þle listed, click Other PPD. A dialog box
opens showing the PPD Þles you have installed in the
System Folder, Extensions folder, Printer Descriptions folder.
Click TKP360P1.PPD and click Select.