Filter
Top Products
Caring For Your Printer
7
User Manual
7-21
2.
When the printer is on and the
Ready
message or the printerÕs
name appears in the front panel, press the
Clean
button. The
printer displays the Þrst selection in the menu:
Clean:Light Stripes
<---- Clean Test
3.
Press the left arrow
(
<---
)
button until the following front panel
message appears:
Clean:Ink Smears
<---- Clean Test
4.
Press the
Clean
button. The printer displays the following
message:
Warming Up
Cancel
5.
After a short delay during the warm-up period, the printer begins
an automatic sequence of feeding
10
clean sheets of paper from the
media tray selected as the cleaning page source. A front panel
message indicates the number of sheets remaining to be fed. For
example:
Cleaning:Using 10 Sheets
6.
When the cleaning sequence is complete, inspect the last sheet of
paper fed through the printer. If it is not clean, repeat the cleaning
sequence by pressing the
Clean
button once again.
7.
Return the printer to normal operation by pressing the
Exit
button.
If the ink smear problem persists
: Refer to the following two procedures for
directions on cleaning paper-feed rollers and the paper-exit path.