Filter
Top Products
Getting Set Up
2
User Manual 2-17
Connecting an external hard disk (optional)
The Phaser 360 printer has a SCSI (Small Computer System Interface,
pronounced ÒscuzzyÓ) port on the rear panel. The SCSI speciÞcation is an
industry standard for connecting computer peripherals. Use this port only
for connecting an external hard disk to the printer. You can connect one or
more SCSI external hard disks to the printer for additional font storage and
collation. Tektronix offers a 2.1-Gbyte hard disk that mounts conveniently on
the rear of the printer.
You can use most commercial SCSI hard disks with up to 2.1 Gbytes of
memory with the Phaser 360 printer. For example, SCSI hard disks that
work with an Apple LaserWriter will work with a Phaser 360 printer.
Contact your computer or printer dealer for information.
■ See the printerÕs CD-ROM for complete directions on installing an
external hard disk and downloading fonts.
■ Refer to ÒUsing the Quick Collate optionÓ on page 5-9 for details
on collating multipage jobs.
■ See ÒTektronix external hard diskÓ on page 10-5 for ordering
information. Refer to ÒInterface cables and adaptersÓ on page 10-7
for information on ordering SCSI cables.