Filter
Top Products
Installing Printer Software
3
User Manual 3-9
13.
Enter a name for the printer, and select the Phaser 360 as the
default printer if desired, and click Next.
14.
Decide if you want to share the printer, Shared or Not shared, and
click Next.
If you are installing drivers for platforms other than Windows NT
4.0, for example Windows 95, a message appears during the
installation procedure asking for the location of printer Þles. If
you see this message, at the prompt, type in the CD-ROM drive
followed by \PPDS95NT.DVR
TEKMSDRV, and click OK. Files are
copied to your computerÕs hard disk.
If you are installing drivers for Windows NT 3.51 for platforms
other than i386, click Browse to locate the appropriate
subdirectory under \PPDS95NT.DVR
TEKMSDRV\WINNT351 on
the printer's CD-ROM.
15.
Decide if you want to print a test page, select Yes or No, and click
Finish.
16.
In the Installation Completed dialog box, click Finish.
17.
You may see a Restart Windows dialog box if the system needs to
be updated. Decide if you want to restart now or later, and
click OK.