Filter
Top Products
Installing Printer Software
3
User Manual 3-21
Setting up the Phaser 360 GX driver
If you are using Apple Macintosh QuickDraw GX, use the Phaser 360 GX
driver to print to your Phaser 360 printer.
■ The Phaser 360 GX driver works with QuickDraw GX and
non-QuickDraw GX applications.
■ QuickDraw GX does not work with non-QuickDraw GX printer
drivers. If you want to print from non-QuickDraw GX
applications with a driver such as the LaserWriter 8.3.4, you must
Þrst disable QuickDraw GX.
■ QuickDraw GX is compatible with System Software 7.5 and later,
but not with Mac OS 8.0 and later.
Note
Refer to the on-line manual on the printer’s CD-ROM for details
on using the Phaser 360 GX driver.
1.
Install the printerÕs software as described on page 3-17. Select
Easy Install to automatically install all of the necessary software,
or select Phaser 360 GX Driver in the Custom Install window.
2.
From the Apple menu, select Chooser.
3.
Click the Phaser 360 GX printer driver icon on the left side of the
Chooser. A list appears with the printers available on your
network. (If the printer driver icon does not appear, Restart your
Macintosh, and repeat the printer driver installation procedure;
also, check the cable connections on your computer and printer.)
4.
Click on the Zone your printer is in. See your network
administrator if you have questions.