Filter
Top Products
Caring For Your Printer
7
User Manual
7-13
4.
Install the new maintenance tray by sliding it into the printer.
Make sure the tray slides in straight on both sides.
5.
Using both thumbs, push the tray in Þrmly until it latches.
6.
Close the front cover and wait for the printer to warm up (about
15 minutes).
7.
To prevent leaking, seal the used maintenance tray in the plastic
bag from the new (replacement) maintenance tray. Treat the used
maintenance tray as normal ofÞce waste.
9922-38
9922-150