Tektronix 360 Printer User Manual


 
Phaser
®
360 Printer Warranty
Tektronix warrants that the Phaser 360 printer will be free from defects in materials and workmanship for a
period of one (1) year from the date of shipment. If this product proves defective during the warranty period,
Tektronix, at its option, will either repair the defective product on-site or by means of telephone support without
charge for parts and labor, or provide a replacement in exchange for the defective product.
In order to obtain service under the product warranty, Customer must notify Tektronix or its authorized
representative of the defect before the expiration of the warranty period and make suitable arrangements for the
performance of service. Tektronix or its authorized representative will provide such service at the CustomerÕs
site, if required, without charge during the warranty period, if the product is located in a normal on-site service
area. Outside the U.S., a description of the normal on-site service area can be obtained from the Local Tektronix
Subsidiary or Authorized Tektronix Distributor.
The maintenance tray in this product will be free from defects in materials and workmanship for a period of
ninety (90) days from the date of shipment or six (6) months where longer periods are required by law. If the
maintenance tray proves defective during the warranty period, Tektronix, at its option, will either repair the
defective product without charge for parts and labor, or provide a replacement in exchange for the defective
product. This 90 day warranty applies only to maintenance trays returned to the designated Tektronix depot.
For trays returned to other locations, Customer will be assessed an applicable service charge. The preceding
limitation shall not apply within the European Economic Area, where trays may be returned for warranty
service to the nearest designated service depot regardless of the place of purchase.
This warranty shall not apply to any defect, failure, or damage caused by improper use or improper or
inadequate maintenance and care. Tektronix shall not be obligated to furnish service under this warranty:
a. to repair damage resulting from attempts by personnel other than Tektronix representatives to
install, repair, or service the product;
b. to repair damage resulting from improper use or connection to incompatible equipment;
c. to repair any damage or malfunction caused by the use of non-Tektronix supplies or consumables;
d. to repair a product that has been modiÞed or integrated with other products when the effect of such
modiÞcation or integration increases the time or difÞculty of servicing the product;
e. to repair damage or malfunction resulting from failure to perform user maintenance and cleaning at
the frequency and as prescribed in the user manual; or
f. to repair this product after the limit of its duty cycle of 50,000 pages per month has been reached. All
service thereafter shall be billed on a time and material basis.
THE ABOVE WARRANTIES ARE GIVEN BY TEKTRONIX WITH RESPECT TO THIS PRODUCT IN LIEU OF
ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TEKTRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX
AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
WARRANTY 2(g)