Filter
Top Products
7
Caring For Your Printer
7-10
Phaser 360 Color Printer
4.
Lift one corner of the waste liner handle to release it from the
maintenance tray; remove the waste liner.
5.
Empty the contents of the waste liner by twisting it. Make sure
that you empty the waste liner completely before replacing it in
the maintenance tray. Used ink is nontoxic; it can be treated as
normal ofÞce waste.
6.
Place the waste liner back in the maintenance tray.
a.
Place the side opposite the handle into the maintenance tray
first.
b.
Press down Þrmly in the center of the waste liner to snap it
into place. Make sure that the waste liner is fully seated in the
maintenance tray.
7.
Reinsert the maintenance tray into the printer.
Note
To prevent media jams at the media tray, be sure to push the
maintenance tray into the printer until both sides latch in place.
8.
Close the front cover.
9101-39
456
a
b