Filter
Top Products
Troubleshooting
8
User Manual
8-3
Jam:Open Front
Cover
Open the front cover and remove the paper jam from
the manual-feed slot or behind the front cover. You may
need to push on both sides of the maintenance tray to
relatch it or clean the upper or lower paper-feed rollers.
Jam:Remove Lower
Tray
There is a paper jam at the lower paper tray. Remove
the tray and the jammed paper.
Jam:Remove Upper
Tray
There is a paper jam at the standard media tray.
Remove the tray and the jammed paper. You may need
to run the Clean:Paper Jams routine if this problem
persists.
Jam:Retry Manual
Feed
Remove the media from the manual-feed slot and
reinsert it.
Lower Media Tray
Empty
Add paper to the lower paper tray.
Maintenance Tray
(B) Low
The maintenance tray is nearly empty of drum fluid.
Open the front cover, remove the maintenance tray,
and replace it with a new one.
Manual Feed Paper
The printer requires a sheet of paper for self-cleaning,
but the media tray contains transparencies. Feed a
sheet of paper into the manual feed slot.
Media Tray Empty
Add paper or transparencies to the media tray.
Out of Ink
One or more ink bins is empty. Load the appropriate
ink stick(s).
Replace Lower
Media Tray
Insert the lower paper tray.
Replace Media Tray
Insert the standard media tray.
Replace Upper
Media Tray
Insert the standard media tray.
Tray (B) Locked
The printer has locked the maintenance tray because
hot ink is present. Close the front cover and wait for a
few minutes before trying to remove the maintenance
tray.
Unlock Transit
Restraint
Unlock the transit restraint on the right side of the
printer before sending print jobs.
Front panel messages (cont'd.)
Message Action