Filter
Top Products
131
Troubleshooting
If you experie nce difficu lty while in TrunkTracker™ mode, try the f ollowing ste ps.
Scan w on’ t start. You mus t pres s
[SCAN/SEARCH] to scan .
Press [SCAN/SEARCH].
T he squel ch m ig ht ne ed to be
adjusted.
Adjust the squelch threshold. See “Turning
On the Scanner and Setting the Squelch”
on Page 49.
One or more channels m ight be
locked out.
Make sure the ch annels you wa nt to scan
are not locked out.
The antenna might need to be
adjusted.
Check the antenna connection.
Weather sc an does n’ t
work.
T he squel ch m ig ht ne ed to be
adjusted.
Adjust the squelch threshold. See “Turning
On the Scanner and Setting the Squelch”
on Page 49.
The antenna might need to be
adjusted.
Check the antenna connection.
There might not be a NOAA
weather broadcast in your area.
Move to an area with a NOAA weather
broadcast.
Problem Possible Cause Suggestion
Scanner won’t track a
trun ked system.
Th e syst em might not be one
yo ur scan ne r can scan .
Change to ano ther system and try
sca nning t hat system.
The data frequency might be
missing.
Ente r the data fr equency.
The scanner might need to be
changed to a T ype I scanner
setup.
C hange to a Ty pe I scanner s etup. Review
p rog ra mm ing Motorola systems on th e
Uniden website, scanners.uniden.com
Th e syst em yo u are trying to
scan might be LTR or EDACS.
Set the scanner to scan LTR or EDACS
systems. Re vie w the LTR and EDACS
programming inf ormation at
scanners.uniden.com
No ID’s have b ee n
programmed.
Pro gra m one or more ID’s or use the ID
Sear ch mode .
The ID’s you have stored are
not acti ve.
W ait for the ID’s to b e come active or sca n
a noth er system.
Problem Possible Cause Suggestion