Filter
Top Products
4. Getting started
Image 4-9
4. Adjust the keystone by pres sing the ▲, ◄, ▼ or ► key.
In the following cases (for front projection):
Image 4-10
5. Press the ON/OFF, OK or HO ME key to exit the menu.
Important
• For proper KE YS TONE-m ode a d justment results, reset the lens to the factory-adjusted position using LENS SHIFT RESET in
the INSTALLATION 1 menu in the ADVANCED
menu before carrying out KEYSTONE-mode adjustment.
• When the KEYSTON E-mode adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines
may bend in images with complicated patterns. They are not due to product malfunctions.
• When the KEYSTONE-mode adjustment is per formed, the displayed image may be distorted.
• Depending on the installation conditions of the projector and the screen, a perfect rectangular image and the proper aspect
ratio ma y not be obtained. Slight distortion can be corrected by the CORNERSTONE-mode adjustment.
• Noise may appear on the screen during the K
EYSTONE-mode adjustment b ecause of the type of the video signal being pro-
jected and the setting values of the KEYSTON E -mode adjustment. In such cases, set the KEYSTONE-mode ad justment values
in the range where the image is displayed without noise.
• When you carry out the KEYS TONE-mode adjustment and the CURVED-mode adjustment in c ombination, the adjustment
range becomes narrower than that in the case where you carry out these adjustments individually. When setting the KEY-
STONE-mode adjustment value to 11 or larger, you cannot use the CURVED-mode adjustment.
• When carrying out the KEYSTONE-mode adjus tment while the option lens is in use, you may not be able to obtain a perfectly
rectangular image or the correct aspect ratio. Slight distortion can be corrected by the C ORNERSTONE-mode adjus tment.
4.7 Blanking the screen temporari
ly
About blanking temporarily
The video s ignal is temporarily muted. The screen turns black. You will hear a mechanical shutter sound inside the projector.
How to set the BLANK mode
1. Press the ▲ key on the remote control twice while the menu is not displayed.
36
R5905597 PHXX SERIES 28/01/2014