Filter
Top Products
7. Initial network settings
How to set or clear
1. Display the IP CONFIG menu.
2. Press the ▲ or ▼key to select DHCP.
DHCP
ON
Image 7-11
3. Press the ◄ or ► key to select ON or OFF.
→ When setting DHCP to ON, IP ADDRESS , SUBNET MA SK, and DEFAULT GATEWAY cannot be set. If you s et those settings,
set DHCP to OFF and perform the IP settings as the following procedures.
→ Until the execution of SAVE SETTINGS, the change is not saved.
7.4.3 IP Address Settings
IP Address
Numerical address to identify networked computers.
How to set
1. Display the IP CONFIG menu.
2. Press the ▲ or ▼ key to s elect IP ADDRESS.
0. 0. 0. 0
IP ADDRESS
Image 7-12
3. Press the ENTER key.
IP ADDRESS screen appears.
192 . 168 . 0 . 10
0
OK
CLEAR
DEL
CANCEL
123456 78 9
← →
IP ADDRESS
Image 7-13
4. Press the direction keys to move the k ey cursor, select the numbers to enter, and press the ENTER key.
Set the nume ric va lue within the range from 0 to 255. However, set the numeric value for the final octet within the range from 1
to 254.
← key:
Shifting the position of enter cursor to the left.
→ key:
Shifting the position of enter cursor to the right.
DEL key:
Deleting the cha racter in the position of enter cursor for each character.
CLEAR key:
Deleting all the entered characters.
5. When selecting OK, the setting is completed as the IP ADDRES S stored temporarily. However, when selecting CANCEL, the
setting is completed without storing.
→ When the setting you entered is correct, the IP CONFIG menu is dis played. If the entered content is not correct, the IP CO NFIG
menu is displayed after an error dialog is displayed.
→ Until the execution of SAVE SETTINGS, the change is not saved.
7.4.4 Subnet Mask Settings
Subnet Mask
A num eric value to define the number of bits used for a network addre ss of a divided network (or subnet) in an IP
Address.
How to set
1. Display the IP CONFIG menu.
2. Press the ▲ or ▼ key to select SUBNET MASK.
78
R5905597 PHXX SERIES 28/01/2014