Filter
Top Products
6. Adjustments with the ADVANCED menu
14.Select a setting value by pressing the ◄ or ► key.
15.R epeat step 13 and step 14, if necessary.
16.Press the MENU k ey once.
17.Select BRIGHT UN IFORMITY CORRECTION
by pressing the ◄ or ► key.
SETTING
BRIGHT UNIFORMITY
CORRECTION
Image 6-16
→ When EDGE BLE NDING is O N, the brightness of the pr ojected images is made even.
18.Press the ENTER key.
The BRIGHT UNIFORMITY CORRECTION dialog box and the correction position marker are displayed.
:
:
2
1
POSITION
SELECT ENTER
Image 6-17
1 BRIGHT UNIFORMITY CORRECTION dialog box
2 Correction position marker
Every time you press the ENTER k ey, the BRIGHT UNIFORMITY CORRECTION dialog box shows POSITION and LEV EL al-
ternately.
POSITION
Press the ▲, ▼, ◄,or► key to move the correction po sition m arker.
LEVEL Press the ◄,or► key to adjust the correction amount.
19.Cancel the B RIGH T UNIFORMITY CORRECTION dialog box.
Press any key other than the ▲, ▼, ◄,or►, and ENTER keys to c lear the dialog box. Or, the dialog b ox disap pears in 10
seconds after the last use.
20.To cancel the menu, press the MENU key.
6.17 Adjusting the color variations
How to adjust
You c an adjust the variations in the colors of the images displayed on m ultiple projectors using the menu settings.
Adjustment while viewing the screen
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the ▲ or ▼ key.
OFF
COLOR MATCHING
Image 6-18
3. Select MANUAL by pressing the ◄ or ► ke y.
4. Select MANUAL by pressing the ▲ or ▼ ke y.
MANUAL
SETTING
Image 6-19
5. Select SETTING by pressing the ◄ or ► key.
6. Press the ENTER key.
66
R5905597 PHXX SERIES 28/01/2014