Filter
Top Products
6. Adjustments with the ADVANCED menu
6.19 When the projected image is distorted
What should happen:
When the projected image is distorted, ca rry out any of the KEYSTONE, CORNERS TONE, and CURVED mode adjustments to
correct the distortion.
When the image distorts in a trapezoid shape, use the KEYS TONE-m ode adjustment. For fine adjustment of the image shape, use
the CORNERSTONE- mode adjustment. To adjust the ima ge projected on a curved surface, use the CURVED -mode adjustment.
Every time you press the ENTER key selecting the GEOMETRY menu, the menu switches in the order of KEYSTON
E, CO RNER-
STONE, CURVED, INSTALLATION 1 menu, KEYSTONE....
6.19.1 Adjust using Keystone mode
What can be done?
When the image distorts in a trapezoid shape, use the KEYSTONE-mode adjustment.
How to adjust
1. Display the INSTALLATION 1 menu.
2. Select GEOMETRY by pressing the ▲ or ▼ key.
3. Press the ENTER key.
The KEYSTO NE m enu appears.
: 0
: 0
KEYSTONE
KEYSTONE
SELECT : MENU
Image 6-24
4. Make adjustment using the ▲, ▼, ◄,or► key.
Every time you press the ME NU key, the adjustm ent m enu changes as follows:
KEYSTONE → RESET → KEYSTONE ...
KEYSTONE menu
You can correct the distortion vertically or horizontally focusing on the screen center.
In the following cases (for front projection):
Image 6-25
When you press t h e ◄ or ► key in the RESET m ode, the distortion correction is reset.
68
R5905597 PHXX SERIES 28/01/2014