Filter
Top Products
6. Adjustments with the ADVANCED menu
2. Select SIGNAL MEMORY while AUTO is selected in the MEMORY C ALL b y pressing the ▲ or ▼ key.
3. Select MEMORIZE
and press the ENTER key.
4. Select your desired memory number by pressing the ◄ or ► key.
5. Press the ENTER key to save the memory.
- To save the new setting, select a new memory num ber. The memory num ber of the MEMO RY CALL changes to a new one
after saving the setting.
- W hen the setting in the selected memory number is ch anged, the changed setting is automatically saved.
To select the saved memory by the MEMORY CALL
1. Display the SIGNAL menu.
2. Select MEMORY CALL by pressing the ▲ or ▼ key.
3. Select your desired memory number by pressing the ◄ or ► key.
- O nly the memory nu mber relevant to the input signal can be selected.
- W hen the same signal is input on the next time, the selected memory number is still mem o rized.
6.12 Adjusting a computer image
How to adjust
This projector automatically selects a proper signal format according to the type of video signal supplied from the com puter. However,
video signals from the co mputer may not be projected correctly depending on the types of the computer and images to be projected.
In such a c ase, make adjustment according to the flowchart below.
62
R5905597 PHXX SERIES 28/01/2014