Filter
Top Products
4. Getting started
The MUT E screen appears. “MUTE O N - P RE SS ANY KE Y TO E XIT” is displayed for 3 seconds. T hen, th e mec hanical shutter
is closed and the projector goes into the BLANK mode.
2. To cancel the BLANK mode, p ress any key on the rem ote control.
4.8 Auto position mode
Act as follow
When the image supplied from the computer is displaced, carry out the following procedure.
1. Project a bright image containing as many texts and characters as possible.
2. When the screen saver has been en abled, disable it.
3. Press the HOME key to display the OSD Lite menu and press the OK key.
The INPUT menu is displayed.
4. Press the ▲, ◄, ▼ or ► key to selec t AUTO POSITION.
Image 4-11
The projector automatically makes optimum positional settings for the input signal.
5. If the projected imag e is still displaced even after carrying out the AUTO PO SITIO N several times, refer to the procedure to adjust
computer images.
6. When you c arry out this procedure with a dark image, the image may be displaced.
R5905597 PHXX SERIES 28/01/2014
37