Filter
Top Products
5. Advanced menu
5.4 Installation 1 menu
Overview
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN
FEATURE SIGNAL NETWORK INFO
LAMP MODE
LAMP SELECT
STANDARD
1H/24H
LOW
OFF
STANDARD
DUAL
LAMP RELAY
HIGH ALTITUDE MODE
STANDBY MODE
IMAGE REVERSE
LENS LOCK
ENTER
GEOMETRY
ENTER
TEST PATTERN
ENTER
SPLIT
ENTER
AUTO POSITION
ENTER
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN
FEATURE SIGNAL NETWORK INFO
LENS LOCK
LENS SHIFT LOCK
ZOOM/FOCUS LOCK
LENS SHIFT RESET
OFF
OFF
OK
Image 5-14
Item
Setting
Function
LAMP MODE STANDARD Select to optimize the settings automatically depending on the input
signal. ( Select this option for normal use.)
LOW Select to moderate the intensity of the lamp. The operating sound is
reduced and the lamp lifetime becom es longer.
LAMP SELECT
DUAL
LAMP 1 and LA MP 2 illuminate.
SINGLE
The lamp with shorter operation time is automatically se lected at
power‑on.
LAMP 1
LAMP 1 illuminates. (When it is broken or dead, LAM P 2 illuminates
automatically.)
LAMP 2
LAMP 2 illuminates. (When it is broken or dead, LAM P 1 illuminates
automatically.)
LAMP RELAY DUAL: OFF The LAMP RELAY doesn’t work.
DUAL: 1H/24H
/2H/1W
Use to set the lamp relay interval.
SINGLE: OFF
The LAMP RELAY doesn’t work.
SINGLE: 24H
/1WEEK
Use to set the lamp relay interval.
STANDBY MO DE STANDARD S elect this option when you control the projector via the LAN,
REMOTE 1 IN, and S ERIAL OUT termina
l during power standby.
LOW Select this o ption when you don’t control the projector via the LAN,
REMOTE 1 IN, and SERIAL O UT termi
nal during power s tandby. This
option disables the LAN, R EM OTE 1 IN, and SER IAL OUT t erminal
and reduces the power consumption du ring the power standby.
IMAGE REVERSE OFF Select when viewing images from the front with the projector installed
on the floor.
MIRROR Select when viewing images pr ojected from the behind of the screen
with the projector installed on the floor.
INVERT Select when viewing images pr ojected from the behind of the screen
with the projector installed on the c e iling.
MIRROR INVERT Select when viewing image s from the front with the pr ojector installed
on the ceiling.
HIGH ALTITUDE MODE STANDARD This projector does not support this function.
LENS LOCK
ENTER
The LE N S LOCK menu is displayed for the following settings.
ZOOM/FOCUS LOCK ON / OFF Use to ena ble o r cancel the FO CUS LOCK and ZO OM LOCK.
LENS SHIFT LOCK ON / O FF Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RES E
T
OK
Usetoresetthe
position of the lens to the factory setting.
44
R5905597 PHXX SERIES 28/01/2014