Filter
Top Products
5. Advanced menu
Item
Setting
Function
DVI LONG CABLE AUTO Select this option for normal use.
MANUAL
Use to adjust the amount of transmiss ion signal correction when a
long DVI cable is used.
REMOTE 1 MODE
ENTER
Select when controlling the projector by a control panel connected to
the REMOTE 1 IN terminal.
PIN 1
GND Unc hangeable. (Fixed.)
PIN 2
POWER / NONE S elect POWER or NONE.
PIN 3
COMPUTER 1
PIN 4
COMPUTER 2
PIN 5
VIDEO
PIN 6
S-VIDE O
PIN 7 DVI
You can ass ign COMPUTER 1, CO M PUTER 2, VIDEO, S-V IDEO,
DVI, HDM I, SDI (for PHW U-81B only), or N ONE to each pin. Though
the assignment can be duplicated, the pins so assigned become
invalid and their settings are displayed with asterisks at both ends
(like “*COMPU T ER 1*”).
PIN 8 BLANK / N O NE Select BLANK or NONE.
PIN 9 ON/OFF Unchangeable. (Fixed.)
RESET
OK
Settings are reset to the defaults.
FILTER MENU
ENTER
The filter menu for the following settings is displayed.
CLEANUP PERIOD
24H
/1WEEK /OFF
You can set the filter cleaning interval.
MANUAL CLEANUP
OK
Select this option to clean the filter immediately.
• When STANDBY MODE in the INSTA LLATION 1 menu is LOW, you cannot select R EM OTE 1 MO DE.
5.6 Multi-Screen menu
Overview
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN
FEATURE SIGNAL NETWORK INFO
EDGE BLENDING
SETTING
OFF
OFF
EDGE ADJUST
COLOR MATCHING
SETTING
MEASURED DATA
MANUAL
MEASURE
Image 5-16
Item Setting Function
EDGE BLENDING OFF Select when using the projector alone
ON Select when using the projector to configure the m u lti-screen
consisting of multiple projectors.
The following settings in th e SETTING becom e enabled to make the
overlapped ar ea of the displayed images unnoticeable.
SETTING
EDGE ADJUST
Use t o make the overlapped area of the screens unnoticeable in the
multi-screen application. Use t his setting to select the edges to be
overlapped or to set the overlapped areas.
BLACK LEVEL
In the multi-screen application, the black level in the areas whe re
images are overlapped will become bright. So, use this setting to
adjust the black level in non-overlapped areas.
BRIGHT UNIFORMITY
CORRECTION
Use to correct non-uniformity in the screen brightness of the single
projector to facilitate edge blending.
46
R5905597 PHXX SERIES 28/01/2014