Filter
Top Products
5. Advanced menu
Item Description
LAMP 2 TIME (LOW) This item shows the lamp operation time calculated b ased on that the LAMP MODE of LAMP
2isLOW.
→ When the LAMP MODE is S TANDARD, this item shows a longer lamp operating time than
the actual time.
→ When the lam p operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time
exceeding 10 h ours is indicated by the actual hours.
→ When the lamp operating time reaches 3000 hours, the bar turns to yellow. W hen it reaches
3800 hours, the bar turns to red.
→ The icon displayed to the right of the bar shows the lamp status. Yellow: On, Red: End of lamp
life or err or such as illumination failure, Black: Off
NEXT LAMP RELAY The next lamp relay time is displayed.
FILTER TIME
The filter operation time is displayed.
SERIAL NUMBER The serial num ber of the projector is displayed.
INPUT
Indicates the name of the terminal to which the currently projected video s ignal is being input.
RESOLUTION Indicates the resolution of the currently projected video signal.
VERTICAL FRE Q UENC Y Indicates the v ertical frequency of the currently projected video signal.
HORIZONTA L
FREQUENCY
Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE Indicates the type of the sync signal for the currently projected v ideo signal.
• NEXT LAMP RELAY isn’t displayed when LAMP RELAY is OFF or LAMP SELECT is LAMP 1 or LAMP 2 in the INSTALLATION
1 menu.
R5905597 PHXX SERIES 28/01/2014
53