Filter
Top Products
Replace the Separation Pad
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter6_3_4.html[3/11/2013 10:24:06 AM]
3
Press and hold the green buttons (1) of the Separation Pad and then pull the Separation Pad (2) upward.
4
Attach a new Separation Pad into the Separation Pad Cover.
5
Close the Separation Pad Cover until it clicks.
6
Close the Front Cover and the Top Cover.
7
Reset the counter (see Reset the Usage Counters).
Note
Confirm the following items:
•
The value of Separation Pad Count is 0 (see Check Consumable Replacement Cycle (Windows
®
) or Check
Consumable Replacement Cycle (Macintosh)).
• The error message on the Status Monitor has been cleared.
• The LEDs do not indicate Replace Separation Pad and Replace Separation Pad and Pick-up Roller (see
LED Indications
).