Filter
Top Products
Change Scan to PC Settings
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter4_2_19.html[3/11/2013 10:23:42 AM]
24bit Color
Uses up to 16.8 million colors to scan the image.
Although using 24bit Color creates an image with
the most accurate color reproduction, it requires the
most memory and has the longest transfer time.
Auto
Uses suitable colors for your document
automatically.
Document Size Document size is set to Auto by default. You can scan
documents of any size without making any adjustments
to Document Size. For faster scan speeds you can
select the exact size of your document from the
Document Size drop down list.
Note
• If you select a 1 to 2 document size, the scanned
image will be divided into two documents that are
half the size of the setting. If you select 1 to 2
(A4), the scanned image will be divided into two
5.8 × 8.3 in. documents.
• To do 1 to 2 scanning, uncheck the Automatic
Image Rotation check box in the Advanced
Settings dialog box.
• If you select a 2 in 1 document size, two scanned
images will be combined into one document.
Yes Yes Yes Yes
Brightness Adjust the setting (-50 to 50) to get the best image.
The default value of 0 represents an average and is
usually suitable for most images. You can set the
Brightness level by dragging the slider to the right or
left to lighten or darken the image. You can also enter
a value in the box to set the level. If the scanned
image is too light, set a lower Brightness level and
scan the document again. If the image is too dark, set
a higher Brightness level and scan the document
again.
Yes Yes Yes Yes
Contrast Adjust the setting (-50 to 50) to get the best image.
The default value of 0 represents an average and is
usually suitable for most images. You can increase or
decrease the contrast level by moving the slider to the
right or left. An increase emphasizes dark and light
areas of the image, while a decrease reveals more
details in gray areas. You can also enter a value in the
box to set the Contrast.
Note
The Contrast setting is only available when
Yes Yes Yes Yes