Brother ADS2000 Scanner User Manual


 
Change Scan Settings
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_3_27.html[3/11/2013 10:24:35 AM]
setting Scan Type to Auto, Gray (Error
Diffusion), True Gray or 24bit Color.
Continuous
Scanning
Lets you scan multiple pages. After the page is
scanned, you can select to continue scanning or finish.
Using this method, you can scan more pages than the
maximum capacity of the document feeder.
Yes Yes Yes Yes
Duplex(two-
sided) Scanning
If you check this box, the machine scans both sides of
the document. When using the automatic 2-sided
(duplex) scan feature, you must select Long-edge
binding or Short-edge binding depending on the
layout of your original to make sure that the data file
created appears correctly in the scanned document.
Note
The 2-sided (duplex) scanning feature is available
with lengths up to Legal size.
Yes Yes Yes Yes
Carrier Sheet
Mode
You can scan the following documents using the
Carrier Sheet. For this mode, you can select any
setting other than Auto from the Document Size drop-
down list.
Large-sized Documents (A3, B4 and Ledger)
Fold the document in half and insert it in the Carrier
Sheet for 2-sided (duplex) scanning, then both front
and back pages will be combined into a single page.
Important documents (photos, contracts)
Thin paper (receipts)
Irregular-shaped paper (clippings)
Note
Load only one Carrier Sheet at a time.
Set the document in the center of the Carrier
Sheet and align the top of the document with the
top of the Carrier Sheet.
Yes Yes Yes Yes
Plastic Card
Mode
Lets you scan non-embossed cards, such as driver's
licenses or insurance cards, using these automatic
settings:
Resolution: 600 x 600 dpi
Document Size: 2 in 1 (Business Card)
Duplex(two-sided) Scanning: On (Short-edge
binding)
Auto Deskew: Off
Yes Yes Yes Yes