Brother ADS2000 Scanner User Manual


 
Control Panel Overview
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter1_3.html[3/11/2013 10:23:49 AM]
steps.
See Change Scan to PC Settings
to scan using the Scan to PC key (Windows
®
)
and follow the steps.
See Change Scan Settings
to scan using the Scan to PC key (Macintosh) and
follow the steps.
Confirm that the data scanned before the multifeed occurred has been saved, and
start scanning again from the next page or from the beginning.
Note
The data scanned before the multifeed occurred is not saved when scanning
using the Scan to USB key on the control panel unless the file type is JPEG.
Unsupported Device
Remove the unsupported USB device, such as a mouse or mobile device that does
not support USB flash memory drive mode, from the USB direct interface.
Hub is Unusable
A Hub or USB Flash memory drive with Hub has been connected to the USB direct
interface. Disconnect any unsupported devices, such as a USB hub or a USB flash
memory drive that contains a hub.
Storage Full
The connected USB flash memory drive is full. Press any key and then do one of the
following:
Delete unused files or folders from the USB flash memory drive and then try again.
Use a USB flash memory drive that has available space.
Access Error
The USB flash memory drive was disconnected when being accessed. Press any key.
Protected Device
The connected USB flash memory drive is write-protected. Disconnect the protected