Chapter 6 Edit Interface/Connection
Connection: ISDN BRI
6-48
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Connection: ISDN BRI
Complete these fields if you are configuring an ISDN BRI connection. Because
Cisco SDM supports only PPP encapsulation over an ISDN BRI connection, the
encapsulation shown is not editable.
Encapsulation
PPP chosen.
ISDN Switch Type
Choose the ISDN switch type. Contact your ISDN service provider for the switch
type for your connection.
Cisco SDM supports these BRI switch types:
• For North America:
–
basic-5ess—Lucent (AT&T) basic rate 5ESS switch
–
basic-dms100—Northern Telecom DMS-100 basic rate switch
–
basic-ni—National ISDN switches
• For Australia, Europe, and the UK:
–
basic-1tr6—German 1TR6 ISDN switch
–
basic-net3—NET3 ISDN BRI for Norway NET3, Australia NET3, and
New Zealand NET3switch types; ETSI-compliant switch types for
Euro-ISDN E-DSS1 signaling system
–
vn3—French ISDN BRI switches
• For Japan:
–
ntt—Japanese NTT ISDN switches
• For Voice/PBX systems:
–
basic-qsig—PINX (PBX) switches with QSIG signaling per Q.931 ()
SPIDs
Click if you need to enter service profile ID (SPID) information.