11-39
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter 11 Site-to-Site VPN
How Do I...
Step 10 In the IP Address and Wildcard Mask fields, enter the IP address and subnet mask
of the VPN source peer.
Step 11 In the Destination Host/Network group, from the Type field, select A Network.
Step 12 In the IP Address and Wildcard Mask fields, enter the IP address and subnet mask
of the VPN destination peer.
Step 13 In the Description field, enter a short description of the network or host.
Step 14 Click OK.
The new rule now appears in the Access Rules table.