Filter
Top Products
Chapter 31 Router Properties
Date and Time: Clock Properties
31-10
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Trap Receiver
Enter the IP addresses and community strings of the trap receivers—that is, the
addresses where the trap information should be sent. These are normally the IP
addresses of the SNMP management stations monitoring your domain. Check
with your site administrator to determine the address if you are unsure of it.
Click the Add, Edit, or Delete buttons to administer trap receiver information.
SNMP Server Location
Text field you can use to enter the SNMP server location. It is not a configuration
parameter that will affect the operation of the router.
SNMP Server Contact
Text field you can use to enter contact information for a person managing the
SNMP server. It is not a configuration parameter that will affect the operation of
the router.
Netflow
This window shows how your router is configured to monitor Netflow top talkers
on interfaces that have Netflow configured. For more information on the items
shown, see Netflow Talkers.
You can monitor Netflow parameters on your router and view top-talker statistics
in Monitor > Inteface Status and Monitor > Traffic Status > Top N Traffic
Flows. If you do not enable Netflow top talkers, then the top ten talkers are
monitored.
Netflow Talkers
In this window you can Netflow top talkers.
Enable Top Talkers
Check the Enable Top Talkers check box to enable monitoring of the top talkers
on the interfaces that have Netflow configured.